Adena Logo: Martin Magnum 1200 Smoke Machine Page, School Stage Special FX Martin Magnum 1200 Smoke Machine
Icon: Back to Home Page Theatre Home Icon: Back to Stage Special FX Catalogue Index Page Special FX Catalogue Icon: Back to Stage Special FX Smoke Machines Index Page Smoke Machines
Martin Magnum 1200 Smoke Machine

The Magnum 1200 utilises an 850 W heat exchanger together with a high quality piston pump to provide a continuously available flow of dense fog at up to 290 m3 per minute. It has a fast heat up time and is supplied with a remote control that provides a timer and adjustable flow rate. An optional DMX interface module is available to enable the machine to be controlled from any DMX lighting contol console. Built lightweight yet rugged, the Magnum 1200 offers easy portability and it operates at a very low noise level.

The Magnum 1200 is an ideal smoke machine for schools, small theatres, mobile DJs and bands. It's compact lightweight design is both reliable and easy to use providing substantial cost and maintenance benefits over a long operational life.


Features

  • Continuous output.
  • Fog output 290 m³/min.
  • Heat exchanger 850 Watts.
  • Heat-up time 8 minutes.
  • Fluid capacity 2.3 litre.
  • A range of fluid options for different applications.
  • Robust steel and aluminium construction.
  • Hand held timer and output level remote control.
  • On-board remote control storage.
  • Optional DMX interface.
  • Optional flying kit.

Technical Specifications

Maximum Fog Output 290 m3 per minute (approx)
Maximum Operating Time Approx 90 minutes at full output
Operating Time Continuous, automatic level adjustment
Heat-up Time 8 minutes (approx)
Heat Exchanger 850 Watts, direct thermal protection
Max. Ambient Temperature 40 degrees C
Max. Nozzle Temperature 200 degrees C
Exterior Surface Temperature 50 degrees C (Steady state)
Fluid Capacity 2.3 Litres
Fluid Consumption 50 ml per minute at peak output
Fluid Pump Oscillating piston, high pressure
Remote Control - Standard Instant or timer-controlled variable output
Remote Control Connector RJ45
Remote Control - DMX DMX with optional DMX interface module
DMX Connector 3-pin locking XLR on optional DMX interface module
Power Supply Required 220-240V 50/60 Hz
Power Connector IEC 3-pin male socket, supplied with 1.5m power cord and plug
Power Fuse 5 Amp slow-blow
Construction Steel and& aluminium, black paint finish

Dimensions

Length ... 450 mm
Width ..... 205 mm
Height ..... 244 mm
Weight .... 10 Kg
Smoke Machine Dimensions

Ordering Information

DescriptionOrder Code
Martin Magnum 1200 Smoke Machine JEM-MAG1200
Martin Magnum DMX Interface 1200/2500 JEM-DMX1200
The information presented on this page is provided by courtesy of Crown Audio Inc.
Revised: 24-Dec-2010 Copyright (C) 2010 Adena Limited